日韩欧美中文另类一区-亚洲欧美日韩另类丝袜一区二区-午夜福利资源激情视频-黑丝美女张开腿让男人桶

網站公告-NOTICE
航豐實業·產品分類
聯系我們
濟南航豐實業有限公司

電話:15168870138
聯系人:龐經理

網址:http://sznewtr.com  

廠址: 德州市禹城市莒鎮產業園26棟

經銷商地址:天橋區建華五金市場東區5-1  

魯ICP備09095923號-1

新聞資訊

當前位置:首頁 / 新聞資訊

怎么檢查橋架的外觀是否符合規定?

對于電纜橋架這種產品來講,外觀十分的重要!因?yàn)檫@影響著橋架的防腐和壽命等問題!下面濟南電纜橋架的小編就給大家分享一下檢查橋架的外觀是否符合規定的一些標準,希望對大家有所幫助!
The appearance of cable bridge is very important for this kind of product. Because it affects the anti-corrosion and life of the bridge. The next edition of Jinan Cable Bridge Frame will share with you some criteria for checking whether the appearance of the bridge meets the requirements. I hope it will be helpful to you all!
表面防腐層材料應符合現行有關標準的規定。
Surface anticorrosive coatings should comply with the relevant national standards.
熱浸鍍鋅的托盤、橋架鍍層表面應均勻,無毛刺、過燒、掛灰、傷痕、局部未鍍鋅(直徑2mm以上)等缺陷,不得有影響安裝的鋅瘤。螺紋的鍍層應光滑,螺栓連接件應能擰入。
Hot-dip galvanized pallet and bridge plating should be uniform, without burrs, burning, hanging ash, scars, local non-galvanized (diameter more than 2 mm) defects, and no galvanoma affecting installation. The plating of the threads should be smooth and the bolted joints should be able to be screwed in.
電鍍鋅的鋅層表面應光滑均勻,致密。不得有起皮、氣泡、花斑、局部未鍍、劃傷等缺陷。
The surface of galvanized zinc coating should be smooth, uniform and compact. No flaws such as peeling, bubbles, spots, partial non-plating, scratches, etc. shall be allowed.
噴涂應平整、光滑、均勻、不起皮、無氣泡水泡。
Spraying should be flat, smooth, uniform, no skin, no bubbles and blisters.
橋架焊縫表面均勻,不得有漏焊、裂紋、夾渣、燒穿、弧坑等缺陷。
The weld surface of the bridge frame is uniform, and there shall be no defects such as welding leakage, cracks, slag inclusion, burning through, arc pits, etc.
濟南電纜橋架
橋架螺栓孔徑,在螺桿直徑不大于M16時,可比螺桿直徑大2mm。
The diameter of bolt hole in bridge frame is 2 mm larger than that of bolt when the diameter of bolt is less than M16.
螺栓連接孔的孔距允許偏差:同一組內相鄰兩孔間距±0.7mm,同一組內任意兩孔間距±1mm;相鄰兩組的端孔間距±1.2mm。
The allowable deviation of the hole spacing of bolt connection holes: the spacing of adjacent two holes in the same group (+0.7 mm), the spacing of any two holes in the same group (+1 mm), and the spacing of end holes in adjacent two groups (+1.2 mm).
感謝您的閱讀與觀看,本文的精彩內容來自:濟南電纜橋架,我們會有更多的精彩內容繼續為您呈現,詳情請點擊:http://sznewtr.com
Thank you for your reading and watching. The wonderful content of this article comes from: Jinan Cable Bridge, we will continue to show you more wonderful content. For more details, please click: http://sznewtr.com.
 
qq
售前咨詢熱線
15168870138
售后咨詢熱線
13465410318
南华县| 兴义市| 凤阳县| 吴川市| 南丹县| 永登县| 宣威市| 遂溪县| 天津市| 木兰县| 清远市| 刚察县| 邹平县| 连平县| 革吉县| 宕昌县| 加查县| 怀柔区| 东乡族自治县| 离岛区| 城固县| 邢台市| 化德县| 靖安县| 铜梁县| 崇明县| 三都| 巨野县| 奎屯市| 德兴市| 崇义县| 焉耆| 兴和县| 苏尼特左旗| 永丰县| 石台县| 潞城市| 龙井市| 兴文县| 天台县| 武川县|